nedis TVRC2340BK Guide De Démarrage Rapide page 5

in contact with the skin or eyes. If contact has been made,
wash the affected area with copious amounts of water and
seek medical advice.
• Properly dispose of empty cells or batteries.
• Seek medical advice immediately if a cell or a battery has
been swallowed.
• Only use the battery type(s) recommended in this
document.
• Keep cells and batteries clean and dry.
• Do not short-circuit a cell or battery.
• Do not use old and new batteries together.
• Make sure that the battery polarity (+/-) matches the
polarity markings inside the battery compartment.
• When possible, remove the battery from the product when
not in use.
Before first use
4 Newer Samsung, LG, Sony, Philips, and Panasonic TVs should
work directly.
1. Insert 2 type AAA batteries.
2. Aim the remote at your device.
3. Press the on/off button A
the product.
4
If your device switches on or mutes, the remote is ready
for use.
4 If your device does not switch off or mute, follow the steps
in the next chapter.
Programming the product to the device with
a code
1. Switch on your device.
2. Open the code list.
4 You can find the code list via the support page of the
product.
3. Search for the code for your device in the code list.
4
The codes are arranged in order of brand, device, type.
4. Press and hold the button corresponding to your device
(TV/SAT/DVD/DVB-T A
4 The LED indicator A
5. Enter the code from the code list.
4 If the LED indicator A
4 If the LED indicator A
code has been declined. Repeat the previous steps using
another code.
6. Aim the remote at your device.
7. Press the on/off button A
the product.
1
or the mute button A
rtyu
4
lights up.
4
switches off, the code is correct.
4
flashes twice and stays on, the
1
or the mute button A
5
) for 3 seconds.
4
to test
4
to test