Door Removal & Temperature Control - Electrolux ICON E32AF85PQS Guide D'utilisation Et D'entretien

Door Removal & Temperature Control
Door Removal
If door must be removed:
CAUTION
Doors are heavy. Two people are recommended to remove or replace the door
assembly from the cabinet.
• Unplug the unit or switch the breaker
that supplies power to the unit to the
off position.
• Remove the plastic top hinge cover.
• Hold the door in place while removing
the top hinge from the cabinet.
Remove the two ⅜" hex head bolts
•
from the top hinge with a ⅜" wrench
or socket.
• Lift the door upwards and pull up
and away from the cabinet until free
of the bottom hinge pin mounted on
the front of the cabinet.
• To replace the door, reverse the above
procedures and securely tighten all
screws to prevent hinge slippage.
Setting The Custom Set™ Electronic Control
COOL DOWN PERIOD
For safe food storage, allow 4 hours for the appliance to cool down completely. The unit
will run continuously for the first several hours.
CUSTOM SET™ ELECTRONIC CONTROL
The Custom Set™ Electronic Control is located inside the appliance. Temperature is
factory preset to provide satisfactory food storage temperatures. However, the temperature
control is adjustable to provide a range of temperatures for your personal satisfaction.
To adjust the temperature setting, press the UP (+) key for warmer temperature and DOWN
(-) key for colder temperature on the control panel. Allow several hours for the temperature
to stabilize between adjustments. The unit can be adjusted between -10°F (-23°C) and
10°F (-12°C).. By pressing the TEMP MODE key, the temperature display will toggle
between °F to °C.
To turn the appliance OFF, press the UP (+) key until the warmest temperature setting of
10°F (-12°C). show in the display. Then press the UP (+) key 3 times within 3 seconds to
turn the unit OFF. The display will then scroll "OFF" across the display. To turn the unit back
ON, press the DOWN key 3 times within 3 seconds. The control will then display "10°F
(-12°C).)" and may be adjusted to the desired temperature.
Hinge Cover
Hinge Bolts (2)
Hinge Plate
9