Télécharger Imprimer la page

Topcom SOLOGIC B931 Manuel D'utilisateur page 23

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 56
The default settings are:
Dial Mode:
Flash time:
PIN Code:
13 Additional handsets and bases
You can subscribe up to 5 handsets on one base. Each handset can register to 4 base
stations and the user can select which base he wants to use. By default the handset 1 is
registered to the base unit 1.
13.1 Adding a new handset
This is only needed when you have deregistered a handset or when
you bought a new one.
Keep the paging key
in subscribing mode for 3 minutes. Do the following to subscribe the handset:
Press the left 'Menu' key.
Press the up or down key
Press 'Select' to confirm.
Press the up or down key
The handset will now search for a base end when it's found the system PIN code (base
PIN code; default='0000') is asked.
Enter the PIN code and and press 'Select'.
The standby screen will appear when successfully registered and handset name and
number will be shown.
Each handset can be subscribed to 4 different DECT base units. Each
base unit is assigned a number from '1' to '4' in the handset. When
you subscribe a new handset, you can assign a base unit number. It
is best to use '1'.
13.2 Removing a handset
It is possible to cancel subscription of a handset to a base. You should do this if a handset is
damaged and has to be replaced by a new one.
You can only cancel subscription of another handset, not the
handset you are using to do the remove procedure.
Press the left 'Menu' key.
Press the up or down key
Press 'Select' to confirm.
Press the up or down key
Press 'Select' to confirm.
Enter the PIN code and press 'OK'.
Use the up or down key
handset or a non-existing handset, a warning tone will be heard.
Press 'Select'
13
Sologic B931
Tone
Flash-1
0000
on the base unit pressed for 5 seconds. The base unit will stay
17
/
15
7
/
15
7
/
15
7
/
15
7
/
15
7
to confirm your selection or press 'Back'
repeatedly until 'Registration' is selected.
to select a base (1-4).
repeatedly until 'BS Settings' is selected.
repeatedly until 'Terminate HS' is selected.
to select the handset. If you select the current
Sologic B931
5
to leave the menu.
23

Publicité

loading