Hornbach 6497422 Manuel D'installation Et De L'utilisateur page 125

Once the desired pitch angle
is set, tighten the two nuts on
the side of the articulated arm
bracket, by use of a wrench (not
included).
Repeat the same procedure on
the other side of the awning.
Make sure to adjust the pitch
angle evenly on both sides, so
that the front profile remains
horizontal.
The awning s pitch angle can be
adjusted between 14° - 30°.
It is possible to extract the awn-
ing with different pitch angles
on both sides.
3
4
ENGLISH | 125