Hornbach 6497422 Manuel D'installation Et De L'utilisateur page 123

Remote control holder
The remote control holder can
be fixed at a surface by drilling
two holes.
Insert the two plugs and fix it
on the wall using the supplied
Now attach the plastic cover to
the mounted holder.
Stick the remote control on the
magnified holder.
Inserting the remote control
Slide open the battery compart-
ment on the back of the remote
Place the delivered 3 V CR2450
(Lithium) battery with + (plus
pole) facing upwards into the
battery compartment and close
Extending and retracting the
awning by motor
Point the remote control to the
Press the buttons on the remote
button: extract the awning
button: retract the awning
button: stop the movement
of the awning.
Always watch the awning if you
are extracting or retracting it.
Caution! Do not place any
objects on top of the awning.
Do not touch the moving parts
of the awning during opening
and closing. Do not manually
force the articulated arms closer
together; this will damage the
mechanism.
Turning the LEDs on and off
Point the remote control to the
Press button 13 to turn the
LEDs of the awning on or off.
9
screws.
battery
control.
it again.
10
awning.
control:
awning.
1 2
ENGLISH | 123