Hornbach 6497422 Manuel D'installation Et De L'utilisateur page 121

Attach support brackets
Now attach the two
support brackets 7 to the stand
poles 8 and
cassette 13 using the screw kit
16 (M6x20).
Attach each bracket with four
Attach feet
Attach the feet to the bottom
part of the stand poles by slid-
ing the stud into them.
Turn around awning
You can now turn around the
Please make sure that at least
three other person help you to
stabilize the awning and hold it
firm as the counterweights are
not installed yet. Be careful not
to let the studs 10 slip out of the
3
screws.
4
5
awning.
poles.
ENGLISH | 121