Publicité
Les langues disponibles
Les langues disponibles
ENGLISH
9
121°C
134°C
The choice of the sterilisation cycle must be based on the data supplied by the
TECNO-GAZ is at your service to provide sterilization tests for
the management of your sterilization routine
9.1
Cycles backups on USB key
The autoclave records cycle data on an internal memory containing 10 records.
It is possible to save the recorded cycles on a USB memory, using USB port on the side of
main board (Pos. 14).
The USB memory must be formatted in FAT form.
In order to save the data follow these steps:
-If the autoclave is turned on, turn off it (by a general switch Pos. 13)
- Connect the USB memory in the outlet (Pos. 14)
- Push and hold the button SELECT (Pos. 11)
- Switch on the autoclave (by a general switch Pos. 13) and hold the button SELECT (Pos.
11)
The display shows the following screens:
LOG USB, KEY DETECTED, OPENING FILE, MOUNT OK, READING MEMORY, FILE
SAVED!
Once visualized "FILE SAVED!" is possible switch off the device and pull the USB
memory.
12
STERILIZATION CYCLES
STERILISATION TIME
[minutes]
22,5
8
producer of the object you want to sterilise.
DRYING
WORKING
TIME
PRESSURE
[minutes]
[kPa Relative]
20
130 ± 20
15
225 ± 20
Publicité
