Publicité
Les langues disponibles
Les langues disponibles
ENGLISH
WATER LOADED IN CHAMBER MUST ALWAYS GET TO THE METALLIC CATCHER.
OTHERWISE DAMAGES TO THE MACHINE OR TO THE INSTRUMENTS CAN
OCCURR.
5. Leave the button 12 to stop the water inlet.
ATTENTION: LET ALWAYS WATER INLET CHAMBER BEFORE
6. Put the instruments on the trays (see details in section 8.2)
7. Set the required sterilization cycle (Cycle 121°C or Cycle 134°C) pressing the
button 11.
8. Close and block the door (sliding the lever to the right and pushing to the front
panel) and at the same time let the cycle start. If this is not happening in the
stabilized time the autoclave is showing the ERROR 450.
ATTENTION: LET THE CYCLE START UP AND CLOSE THE DOOR AT THE
!
9. Start the sterilization cycle up pressing the button 10.
10
STARTING THE STERILISATION CYCLE UP!
SAME TIME
Publicité
