ENGLISH
1
The autoclave is suitable to sterilize instruments exclusively for esthetician or beauty
salons.
Instruments with no cavities and no obstacles to the penetration of steam
The autoclave shall only have to be used for the sterilization of tools
and materials being compatible with the steam sterilization system.
Always make sure that the loads that need to undergo sterilization can
stand the temperatures scheduled for the selected cycle.
2
2.1
Safety marking
2.2
Safety devices
The following safety devices are installed:
Safety valve set at 2.4 bar +/-10%
·
Resistance over temperature thermostats
·
2.3
Safety notes
· The manufacturer is liable for the marketed product in accordance with current
regulations. The manufacturer's liability will expire when operations are carried out on
the device, or a part of it, by unskilled personnel or using non-original spare parts.
· There should be no potential risk of explosion and/or fire in the room where the
autoclave is installed.
· The autoclave should be installed in a special well-ventilated room.
2
AUTOCLAVE USE AND APPLICATIONS
SOLID INSTRUMENTS
HAZARDOUS
VOLTAGE
DISCONNECT
THE POWER
BEFORE
REMOVING
THE LID
SAFETY
max kg. 0,5
for each tray
HIGH
TEMPERATURE
EARTH
CONNECTION