Blackstone 6038 Manuel Du Propriétaire page 8

OWNER'S MANUAL | ASSEMBLY GUIdE
Use four (4) M6x35 screws
STEP 09
jacket panel assemblies to the jacket base panel assembly.
[c.] × 4
Use four (4) M6x45 screws
STEP 11
panel to the left and right jacket panel assemblies.
Slide the jacket silicon sleeve into the jacket base panel assembly.
[d.] × 4
08
[c.] to attach the left and right
[d.] to secure the rear jacket
Use six (6) M6x15 screws
STEP 10
assembly to the jacket base panel assembly.
[b.] × 6
With the help of another person, direct the regulator hose
STEP 12
and electric wires through the jacket silicon sleeve and place the
griddle body onto the jacket base panel assembly.
MODEL: 6038
[b.] to attach the rear jacket panel
BLACKSTONEPRODUCTS.COM/SUPPORT