Blackstone 6038 Manuel Du Propriétaire page 14

OWNER'S MANUAL | USING YoUR BLACKSToNE
IGNITIoN INSTRUCTIoNS
1. CHECK VALVES
Turn knob to OFF position.
STEP 01
Push in knob and release. Knob should spring back.
STEP 02
If knobs do NoT If knobs do NoT spring back, replace valve assembly before using appliance. spring back, replace valve assembly before using appliance.
Rotate knob to LOW then turn back to OFF. Knob should
STEP 03
turn smoothly.
If burner does not ignite with open LPG cylinder valve, gas
will continue to flow out of burner and could accidentally/
inadvertently ignite with risk of injury.
Ensure gas is off at the supply shut off valve before checking
appliance valves.
3. CHECK BURNER FLAME
Always check burner flame before use.
Light burners and rotate knobs from HIGH to LOW.
STEP 01
Look below the cooking top to view burners. When knob is at
STEP 02
HIGH, flames should be larger than when knob is at LOW.
14
WARNING
2. ELECTRIC IGNITION
DO NOT lean over the appliance while lighting.
Make sure the appliance is plugged in.
Press the ON button.
STEP 01
(optional: Turn the dimmer
until it clicks to turn off the
puddle lights.)
❶ ❶
STEP 02
❶ ❶ Push the control knob in to
start gas flowing. (WHITE)
❷ ❷ Turn the control knob
counter-clockwise to activate the
starter. (FLASHING BLUE)
❸ ❸ Adjust the temperature to
desired level. (ORANGE)
❷ ❷
Note: If the magnet in the knob is disconnected, the indicator light
❸ ❸
will be orange. If the knob arrow is facing UP, gas is not flowing.
❹ ❹
❶ ❶
❸ ❸
❹ ❹
HEALTHY BURNER FLAME
PATTERN
❶ ❶
❷ ❷
❸ ❸
❶ ❶ Flickers of yellow color.
❷ ❷ Dark blue color.
❸ ❸ Vibrant blue.
MODEL: 6038
❶ ❶
❷ ❷
❸ ❸
❷ ❷
BURNER FLAMES ARE YELLOW
OR IRREGULAR
If there is a sudden drop or low
flame issue, please reference the
Troubleshooting chapter.
BLACKSTONEPRODUCTS.COM/SUPPORT