Publicité
Les langues disponibles
Les langues disponibles
Settings
Open the door and press
To open the dishwasher's Settings menu, press or until
and confirm your selection with
To exit the dishwasher's Settings menu, select Exit and confirm your selection with
Settings
1.
Language
2.
Network
WiFi status
WiFi connection
Connection setup
Add device
Remove all devices
WiFi factory reset
Exit
28
.
.
Select setting
Alternatives
You can choose the language used for the display.
The current WiFi status is shown on the display.
Connect the dishwasher to your wireless network to be able to remote
control the dishwasher using the ConnectLife app.
On/Off
After connecting the dishwasher to your local network, you can select
WiFi connection Off to deactivate the connection. Select WiFi connection
On to reconnect to the same network.
Connect the dishwasher to your wireless network and pair with your
smartphone/tablet.
In the ConnectLife application, go to the »Add devices« menu and
select the appropriate type of device. Then scan the QR code (it
can be found on the serial number plate of the appliance; you can
also enter the AUID/SN number manually).
Select Connection setup.
Pair more devices/users with the dishwasher.
In the ConnectLife application, go to the »Add devices« menu and
select the appropriate type of device. Then scan the QR code (it
can be found on the serial number plate of the appliance; you can
also enter the AUID/SN number manually).
Select Add device.
Select Remove all devices to remove all connected devices/users.
Select WiFi factory reset to restore the default factory settings.
Select Exit to exit the menu for Network, press
Settings menu is shown on the display
Confirm setting
.
.
Publicité
