Publicité
Les langues disponibles
Les langues disponibles
Remote control the dishwasher
The dishwasher's network symbol
smartphone/tablet. You can use the ConnectLife app to monitor the dishwasher and change settings.
Remote start the dishwasher
To remote start the dishwasher, press
display. Close the door. The status light will flash blue/green to indicate that remote start is activated.
In the ConnectLife app, select and start a program.
If the door is not closed within 2 minutes, the machine switches off.
NOTE!
The dishwasher can always be used without the app. When the dishwasher's control panel is
pressed, commands from the ConnectLife app are blocked for 10 seconds.
Pair more devices
Pair more devices/users with the dishwasher. (This can also be done from the dishwasher's Settings
menu.)
In the ConnectLife application, go to the »Add devices« menu and select the appropriate type
of device. Then scan the QR code (it can be found on the serial number plate of the appliance;
you can also enter the AUID/SN number manually).
Open the dishwasher door and press
On the dishwasher's control panel: Press and hold
WiFi connection Off / WiFi connection On
After connecting the dishwasher to your local network, you can select WiFi connection Off to deactivate
the connection. Select WiFi connection On to reconnect to the same network. (This can also be done
from the dishwasher's Settings menu.)
On the dishwasher's control panel: Press and hold
Off. Briefly press
Remove all devices
Remove all connected devices/users. (This can also be done from the dishwasher's Settings menu.)
On the dishwasher's control panel: Press and hold
Once a countdown has begun, press and hold
that all devices/users have been erased.
Do you have questions? Please visit us at www.connectlife.io or contact us at hello@connectlife.io.
is shown on the display when the dishwasher is paired with a
. Remote start activated will appear on the dishwasher's
.
to select WiFi connection On again.
for 4 seconds to initiate Add device.
for 8 seconds to select WiFi connection
until Add device is shown on the display.
for 3 seconds. Remove all devices indicates
ConnectLife
27
Publicité
