Télécharger Imprimer la page

Ryobi RY40306 Manuel D'utilisation page 10

Publicité

Les langues disponibles

Les langues disponibles

Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper inter-
pretation of these symbols will allow you to operate the product better and safer.
SYMBOL
V
Volts
n o
No Load Speed
.../min
Per Minute
PRODUCT SPECIFICATIONS
Motor .................................................................. 40 Volt DC
Maximum Pounds Per Square Inch* .......... up to 2,000 PSI
*Maximum rating when tested to PWMA standard PW101.
KNOW YOUR PRESSURE WASHER
See Figure 1.
The safe use of this product requires an understanding of the
information on the product and in this operator's manual as
well as a knowledge of the project you are attempting. Before
use of this product, familiarize yourself with all operating
features and safety rules.
AUTOMATIC DETERGENT INJECTION
SYSTEM
Pour detergent into the soap tank to apply detergent quickly
and easily to your cleaning project. Use of the soap nozzle
will activate the detergent injector at a 20:1 dilution ratio.
POWER SELECT BUTTON
The power select button provides an increase or decrease
in water pressure for different cleaning applications. Choose
between three pressure settings.
HOSE STORAGE
Once the high pressure hose is rolled, hang it on the back of
the machine using the hook-and-loop strap to secure in place.
ON/OFF SWITCH
This switch turns the pressure washer on and off.
SYMBOLS
NAME
Voltage
Rotational speed, at no load
Revolutions, strokes, surface speed, orbits etc., per minute
FEATURES
6 — English
DESIGNATION/EXPLANATION
Maximum Gallons Per Minute ...............................1.2 GPM
SOAP TANK
Remove the cap from the soap tank to add detergent to the
pressure washer.
SIPHON HOSE
The siphon hose with filter gives the user complete portability
to pull water from any water source like a pool or a 5 gal.
bucket of water. It can also be attached to a garden hose
for a continuous water supply.
TOTAL STOP SYSTEM
The pressure washer is equipped with a power-saving feature
that causes the motor to stop whenever the trigger handle
trigger is released. The LED in the on/off switch will flash to
indicate the total stop system is active.
NOTE: The fan will continue to run during total stop to keep
the product cool.
TRIGGER HANDLE
The trigger handle has a gripping surface that provides
added control of the spray wand and helps reduce fatigue.
TRIGGER WITH LOCK-OUT
Pulling the trigger releases a stream of water for high
pressure cleaning. The lock-out provides protection against
unauthorized use.

Publicité

loading