Bose SOUNDBAR 550 Manuel D'instructions page 48

Option 2: Optical
If your TV doesn't have an HDMI eARC (or ARC) port, use the optical cable to connect
the soundbar to your TV.
1. Remove the protective cap from both ends of the optical cable.
CAUTION: Inserting the plug with the cap attached can damage the plug and/or
the port.
2. Insert one end of the optical cable into your TV's Optical OUT port.
CAUTION: Inserting the plug with the wrong orientation can damage the plug
and/or the port.
3. Hold the plug at the other end of the optical cable.
4. Align the plug with the soundbar's OPTICAL IN port, and insert the
plug carefully.
NOTE: The port has a hinged door that swings inward when inserting
the plug.
5. Firmly push the plug into the port until you hear or feel a click.
AP P E ND IX: S ETU P RE F E RE N C E
POWER IR BASS
4 8
OPTICAL IN SERVICE HDMI (eARC)
|
E N G