Haier I-Link HATS6CBS2XWIFI Manuel D'installation Et D'utilisation page 13

INSTALLATION(AIR DEFLECTOR):
Air deflector is mentioned as included and not optional.
1. Before installation,curve both ends of the bracket as shown below:
2. Fix the bracket to the T-shaped plastic outlet with 2pcs ST3.5x12mm
screws provided.
3.Drill 2 holes to accommodate the wall plugs,then screw and tighten the
bracket onto the wall with 2pcs ST4x30mm screws provided.
4.Attach the exhaust pipe onto the air outlet of the cooker hood as shown below:
5.Install the chimney to the unit and fix it.
11