Publicité
Les langues disponibles
Les langues disponibles
V. OPERATION
5.1- Intended use
- The product is intended for domestic use.
- The product is intended for forward and reverse screwing (e.g. changing wheels, exhaust pipe,
shock absorbers, on lawnmowers or small motors)
- The product is not intended for professional and/or industrial use
- Do not use for applications not covered in this manual.
- The manufacturer or seller cannot be held responsible for incorrect or non-compliant use of machine.
5.2- Operation:
1. Connect product to a power source (refer to characteristics on product).
2. Wear appropriate protective equipment.
3. Prepare material for work
4. Secure material if necessary.
Do not use your own weight or body to hold material.
5. Firmly hold tool with both hands. Always maintain a balanced and secure position.
6. Place socket on material. Do not make sudden movements.
7. Press on rocker switch [(R) or (F)] to start operation.
To stop tool, release rocker switch.
8. Once work is finished, stop product by releasing the switch.
Note: do not put down product until chuck has completely stopped rotating.
VI. MAINTENANCE AND STORAGE
Before any intervention on product, ensure that product is disconnected from its power source.
Reminder: Make sure to maintain the machine in good working condition, carry out regular maintenance of the
machine after each use and before storage .Any breach or default of adequate maintenance reduces the life of the
machine and increases the risk of breakdowns and accidents.
To preserve the security system throughout the life of the machine, it is important to perform maintenance and proper
cleaning, DO NOT use non-compliant replacement parts and do NOT dismantle yourself the machine or change the
security features.
6.1- Maintenance
Clean plastic parts with a soft clean cloth.
Do not use aggressive cleansers (solvents or abrasive cleansers), or an abrasive sponge.
Do not put or immerse product in water or any other liquid.
Clean ventilation holes with a soft brush.
6.2- Storage
- Keep the product, user manual and accessories in the original packaging.
- It is recommended to store the tool in a clean, dry area, and place it out of reach of children, either
stored in height or locked up.
6.3- Disposal
When disposing of your tool, be sure to follow the local regulations.
- Do not dispose with household garbage. Do not throw into the environment.
Dispose of the tool in a collection centre for waste of electrical and electronic equipment, or a waste
drop-off centre; or seek advice from your local municipality.
- Carry out the disposal of the unit, its accessories and packaging according to local regulations
regarding environmental protection.
Page 15 / 23
Publicité
