Beninca BOB2124.DK Manuel D'utilisation page 25

BOB
• Do not stand in the movement area of the gate.
• Do not let children play with controls and near the gate.
• Should operating faults occur, do not attempt to repair the fault but call a qualified technician.
In the event of a power cut or breakdown, proceed as follows to operate the wings manually (refer to figures A,B,C,D,E):
• Open the protective door (fig. A)
• After inserting the customized key C, turn it anti-clockwise (fig. B)
• Open the protective door of the release mechanism (fig. C).
• Insert the special release key supplied and turn it through 90°, as indicated in fig. D for a right actuator or as indicated
in fig. E for a left actuator.
• It is now possible to open/close the wing manually.
• To restore automatic operation, return the release key to its initial position.
• Remove the release lever and close the protective door.
• Every month check the good operation of the emergency manual release.
• It is mandatory not to carry out extraordinary maintenance or repairs as accidents may be caused.These operations
must be carried out by qualified personnel only.
• The operator is maintenance free but it is necessary to check periodically if the safety devices and the other compo-
nents of the automation system work properly. Wear and tear of some components could cause dangers.
Fig.C
S
User's handbook
Safety rules
Manual and emergency manoeuvre
Maintenance
Fig.A
C
Fig.D
L
L
Fig.B
Fig.E
25