Publicité
Les langues disponibles
Les langues disponibles
MAINTENANCE
For maintenance, service or warranty questions, please contact an Oreck Customer Care Specialist at 877-533-2019, visit Oreck.com or your local Oreck Dealer.
PROBLEM
POD indicator flashes red.
Speed indicators are both flashing.
POD indicator flashes yellow and
motor stops.
Battery indicator flashes red.
Motor does not start when turned
to an ON position.
All LED lights flash, POD indicator
flashes red & motor stops.
Battery indicator flashes red & green.
13
POSSIBLE CAUSE
SOLUTION
Capacity is full.
Turn power dial to OFF position. Insert a fresh refill into case and
restart unit.
Brushroll has a stall.
Turn dial to OFF position. Remove obstruction from brushroll, if any.
Wait 15 seconds and restart unit. Visit Oreck.com for detailed instructions.
Unit has a clog.
Turn dial to OFF position. Remove tool & check for clog in nozzle. Clear
clog, replace tool, and restart unit. Visit Oreck.com for detailed instructions.
Battery has run out of charge.
Turn dial to OFF position. Plug unit in to charge. Time to full charge is ≈2.5
hours for rapid charger and ≈5 hours for standard charger.
There is no refill installed in
Turn dial to OFF position. Insert a fresh refill into case and restart unit.
unit.
Battery temperature is
Ensure unit is in the OFF position and unplug unit from the charger.
abnormal.
Wait 30 minutes and then plug unit back into charger.
Publicité
