French Plaque; Locking The Controls; Pause Mode; Power Management Function - Haier HAMTP64MC Manuel D'instruction

To activate the French Plaque area, simply press the Flexible
Area control for 2 second
Move the position of the pot, the power will change automatically
Press the Flexible Area control to turn off the cooking zone.

3.3.6 Locking the Controls

 You can lock the controls to prevent unintended use (for example children accidentally turning the
cooking zones on).
 When the controls are locked, all the controls except the ON/OFF control are disabled.
Touch and hold the Lock control for a while.
When the hob is in the lock mode, all the controls are disable except the ON/OFF
turn the induction hob off with the ON/OFF
in the next operation.

3.3.7 Pause Mode

 You can pause the heating instead of shutting the hob off.
 When entering the Pause mode, all the controls except the ON/OFF control are disabled.
Short touch the Pause control
When the hob is in the pause mode, all the controls are disable except the ON/OFF
turn the induction hob off with the ON/OFF
10min if you don't exit the pause mode.

3.3.8 Power Management Function

 it is possible to set a maximum power absorption level for the induction hob, choosing up to
different power ranges.
 induction hobs are able to limit themselves automatically in order to work at lower power level, to
avoid the risk of overloading.

French Plaque

Cancel French Plaque
To lock the controls
The timer indicator will show " Lo "
To unlock the controls
Touch and hold the Lock control for a while.
control in an emergency, but you shall unlock the hob first
To enter pause mode
All the indicator will show " 11"
To exit pause mode
Short touch Pause control.
control in an emergency. The hob will shut down after
14
,
you can always
,
you can always