Publicité
MINIMAL USA
TILE
FLANGE
STRIP
1) Apply tile flange immediately before installing bath.
2) Clean the bath rim.
3) Measure amount of tile flange to be used based on the length of bath rim. Start and finish the tile flange 3/4" (19 mm) in from
end of bath.
4) Identify the corner locations and notch the tile flange so the flange can bend around the corner.
Do not notch through the tile flange.
5) Apply adhesive to bath at location shown.
6) Mount the tile flange to the bath rim starting at one corner, making sure the back of the tile flange is vertical.
7) Press and knead the tile flange in place to provide a watertight seal.
8) Bath is now ready for installation.
Clean the bath with liquid soap and water and soft, non-abrasive cloths or sponges.
never clean with solvents (acetone, alcohol, etc), detergents, or abrasive cloths as these could damage its finish.
To keep the bath looking shiny, use a standard household polish.
Use a soft cloth to clean any metal parts and leave them shiny and scratch free.
Listed by:
6
PRE-INSTALLATION AND INSTALLATION MANUAL
INSTALLATION OPTIONS (Bath)
aGainST THE Wall (Tile flange)
TILE
WALLBOARD
SEALANT
BATH
ADHESIVE
(19 mm)
LEVELING
STRINGER
CLEANING
BACK OF TILE FLANGE
SHOULD BE VERTICAL
TILE FLANGE
ADHESIVE
NOTCH CORNERS
3/4"
CLEAN THIS AREA
TILE FLANGE
WITH ADHESIVE
Publicité
