Atag VA7114RT Manuel D'utilisation page 71

Settings
Table continued from last page
Settings
1 0 . Water hardness
1 1 . Interior light at power
off
Exit
24
Options
0/1/2/3/4/5/6/7/8/9
On/Off
Adjusting the water softener. Select a setting
depending on the hardness of the water
supply. It is important that this setting is
correct!
German French
water water
hardness hardness
scale scale
0-5°dH 0-9°fH
6-8°dH 10-14°fH
9-11°dH 15-20°fH
12-14°dH 21-25°fH
15-19°dH 26-34°fH
22-24°dH 35-43°fH
25-29°dH 44-52°fH
30-39°dH 53-70°fH
40-49°dH 71-88°fH
50°dH 89°fH
Do not forget to put salt in the salt
compartment after you have set the water
softener to 1 - 9.
For a water supply with a hardness under
6°dH (9°fH), select 0. The water softener is
deactivated and no salt is needed.
Select whether the interior light is to be
switched on when the dishwasher is turned
off and the door is opened. (If the main
power switch is turned on, the interior light
is always switched on when the door is
opened.)
To exit the dishwasher's Settings menu,
select Exit and confirm your selection with
the mode selector
Recommended
setting
0
1
2
3
4
5
6
7
8
9
.