TREVIDEA G3 FERRARI VIDRO Mode D'emploi page 11

Once finished, unplug the unit and wait for the complete
cooling of each part before storing or cleaning.
Do not immerse the appliance in water or other liquids. In
any case, avoid splashing of water or other liquids.
Put the kettle on stable shelves and floors.
DESCRIPTION G10163
1 Lid
4 Base
7 Nozzle with filter
MAIN FUNCTIONS
Before using, operate the kettle 2 or 3 times and boil the maximum amount of water (1.7 liters) by replacing
each time hot water with cold water. To open the lid, use the button (8).
OPERATING THE KETTLE
- Pour in the kettle the desired amount of water, never exceeding the limits indicated (MAX: 1.7L, MIN:
0.5L). Close lid until it locks in position and connect the plug.
- Place the kettle on the slot of the power base (4).
- Operate the kettle by pressing the power ON button (2).
- When the liquid is boiling, the thermostat automatically turns off the unit.
- Use hot water as you wish, making sure to completely empty the kettle to prevent limescale on the internal
electric resistance.
CLEANING -
Unplug the unit and wait until the complete cooling down of each part before
starting cleaning operations.
- Do not immerse the base and the kettle in water. In any case, prevent splashes of water or other liquids
from reaching those parts.
- To clean the inside of the kettle, let it cool down and rinse with warm water to remove residues and
impurities. In any case, it will be necessary to periodically descaling the unit.
- Clean the base and the kettle with a damp cloth.
DESCALING THE BOILER
To prevent the formation of lime scale, it is recommended to make periodic special cleaning, following the
instructions below:
Pour water in the kettle until it reaches half the maximum capacity and add some lemon juice.
Boil water mixed with lemon 3 times.
Empty the kettle and rinse by boiling normal water for 2-3 times.
SAFETY SWITCH-OFF
The safety device is triggered if the kettle operates without water inside. To avoid overheating, the appliance
is automatically turned off and cannot be activated until the complete cooling of the electric resistance.
TECHNICAL FEATURES
•
Power supply: AC 220-240V
•
Capacity: 1.8L
•
Control light - Safety device
2 Power on button
5 Container
8 Open-lid button
~
50-60Hz. Power 1850 - 2200W
3 Handle
6 Transparent graduated container
10