dji MATRICE 200 V2 Serie Information Produit page 3

3. Mount the GPS kit with the three screws and then rotate the knob to the lock
position. Mount the right landing gear.
4. Remove the sticker on the GPS kit's cable and then fix the cable onto the
aircraft.
5. Connect the GPS kit's cable to the port as shown.
Ensure the GPS kit is extended and the knob is on the lock positon
every time before takeoff. Ensure the status LED of the GPS kit is
blinking green before takeoff.
Please refer to http://www.dji.com/service for after-sales service for your product
where applicable.
DJI shall mean SZ DJI TECHNOLOGY CO., LTD. and/or its affiliated companies
where applicable.
3
2
1
3
4