Télécharger Imprimer la page

Craftmade Cosmos Fans CO52 Instructions D'installation page 9

Publicité

Les langues disponibles

Les langues disponibles

Common Problems
Problem A: Fan Will not Start
Remedies:
1. Check fuse or circuit breaker and replace if necessary
2. Turn off electrical power and check all wire connectors.
3. Check on/off TCS and wall control selector switch. See operation
instructions.
Problem B: Fan is Excessively Noisy
Remedies:
1. Check that all screws in fan assembly are tight and properly seated.
2. Check to make sure mounting bracket is installed properly.
3. Check to make sure light kit and glass reinstalled properly and tight.
4. If wall control is used, insure the wall control is not a transformer or
a variable speed type.
Problem C: Fan Wobbles
Remedies:
1. Check that all blades are screwed firmly into blade holders.
2. Check that all blade holders are screwed firmly into motor.
3. Check the weight of blades. All our blades are weighed on electronic
scales. The weight is marked on the reverse side of the fan blade near
the motor end. All of the blades should be the same weight to
prevent fan from wobbling.
4. A balancing kit is enclosed if needed.
PRODUCT MODEL
WEIGHT (LBS)
AT52
CXL42
FI52
P252
PX52
SN52
KILOGRAMS
17
7.7
17
7.7
20.1
9.1
21.3
9.7
19
8.6
17
7.7
CO52
Instrucciones de instalación
Modelos: CO52
Cosmos
®
MEJOR DISEÑO

Publicité

loading