ASROCK G41M-VGS3 Mode D'emploi page 15

2.4 Expansion Slots (PCI and PCI Express Slots)

There are 1 PCI slot and 1 PCI Express slot on this motherboard.

PCI slot:

PCI slot is used to install expansion cards that have the 32-bit PCI

interface.

PCIE slot:

PCIE1 (PCIE x16 slot) is used for PCI Express cards with x16 lane

width graphics cards.

If you install the add-on PCI Express VGA card to PCIE1 (PCIE x16 slot),

the onboard VGA will be disabled. If you install the add-on PCI Express

VGA card to PCIE1 (PCIE x16 slot) and adjust the BIOS options "Primary

Graphics Adapter" to [Onboard] and "Share Memory" to [Auto], then the

onboard VGA will be enabled, and the primary screen will be onboard

VGA.

Installing an expansion card

Step 1.

Before installing the expansion card, please make sure that the power

supply is switched off or the power cord is unplugged. Please read the

documentation of the expansion card and make necessary hardware

settings for the card before you start the installation.

Step 2.

Remove the bracket facing the slot that you intend to use. Keep the screws

for later use.

Step 3.

Align the card connector with the slot and press firmly until the card is

completely seated on the slot.

Step 4.

Fasten the card to the chassis with screws.

ASRock G41M-VGS3 / G41M-VS3 Motherboard

1 5

G41m-vs3