HAMPTON BAY GCS09136A Guide D'utilisation Et D'entretien page 6

l
Assembly
2
Attaching the Lower Hanging Bar to the Assembled Base, Attaching
the Upper Hanging Bar to the Lower Hanging Bar, and Put on the
Attached the lower hanging bar (C) to the assembled base by using M8X30 combination bolt, washer , spring washer and nut (BB)
and M8X15 bolt, spring washer and washers (DD).
Insert the decorate ring (HH) to the lower hanging bar (C), then attach the upper hanging bar (D) to the lower hanging bar
(C) using M8X55 bolt, washer and nuts (AA).
Attached the plastic muffler (II) to the upper hanging bar (D) and fit by rotating it.
Once all of the bolts are in place, fully tighten the bolts using the hex wrench (JJ) and wrench (KK).
Pay attetion to the direction for the M8X55 bolt, washer and nut (AA) when assembly step 2.
NOTE:
II
AA
AA
D
2
3
C
BB
1
6
Please contact 1-855-HD-HAMPTON for further assistance.
HH
DD
2X