Rear Panel - HEADRUSH Gigboard Guide D'utilisation Rapide

Rear Panel

1
2
1. Guitar Input (1/4"/6.35 mm, TS): Connect your guitar to this input using a standard instrument cable.
2. Aux Input (1/8"/3.5 mm, TRS): Connect an optional audio source (e.g., smartphone, tablet, etc.) to this input
using an 1/8"/3.5 mm stereo cable.
3. Expression Pedal Input (1/4"/6.35 mm, TRS): Connect an optional expression pedal to this input using a
standard 1/4" (6.35 mm) TRS cable.
4. Expression Pedal Toe Switch Input (1/4"/6.35 mm, TS): Connect the toe switch output of your optional
expression pedal to this input using a standard 1/4" (6.35 mm) TS cable.
5. Outputs (1/4"/6.35 mm, TRS): Connect these outputs to the inputs of your amplifier, audio interface, etc. If
you only need to use one output, use the one labeled L/Mono.
Note: You can set these outputs to send signal at amp level or line level (default) in the Global Settings
Menu.
6. External Amp Footswitch Output (1/4"/6.35 mm, TRS): Connect this output to the footswitch input of an
external guitar amplifier to toggle channels or turn reverb on and off on the amplifier using the Gigboard.
IMPORTANT! Only connect this output to amplifiers that have a "short-to-sleeve" footswitch input. If you
connect this output to any other type of footswitch input, you may cause permanent damage to your
equipment. If you are unsure if your amplifier has a "short-to-sleeve" footswitch input, please consult the
amplifier's manual or manufacturer to confirm before attempting.
7. Phones Output (1/4"/6.35 mm, TRS): Connect standard 1/4" (6.35 mm) stereo headphones to this output.
8. FX Send Output (1/4"/6.35 mm, TRS): Connect these outputs to the inputs of another effects module, an
effect pedal, or the effects loop return of an amplifier.
9. FX Return Input (1/4"/6.35 mm, TRS): Connect these inputs to the outputs of another effects module, an
effect pedal, or the effects loop send of an amplifier.
Note: You can set the FX Return Input to receive signal at rack level or stomp level (default) in the Global
Settings Menu.
10. MIDI Input (5-pin DIN): Use a standard MIDI cable to connect this input to the MIDI output of an optional
external MIDI device.
11. MIDI Output (5-pin DIN): Use a standard MIDI cable to connect this output to the MIDI input of an optional
external MIDI device.
12. USB Port: Connect this USB port to a computer using a standard USB cable. This connection allows
HeadRush Gigboard to send and receive the digital audio signal to and from your computer. You can also use
this connection to import or export rigs, model presets, and setlists.
13. Vent: Make sure this vent is unobstructed while using HeadRush Gigboard.
14. Power Input: Connect this input to a power outlet using the included power cable.
15. Power Switch: Press this button to turn HeadRush Gigboard's power on. Press and hold this button to turn
HeadRush Gigboard's power off.
4
3 5 6
4
7
8
10 11
9
13
12
15
14