Sony SU-WL900 Instructions D'installation page 10

Preparing for the Installation
of the TV or LCD Monitor
Note
 Be sure to store the removed screws and unused parts
in a safe place, keeping them away from children.
1
Attach the Table-Top Stand to
make the TV or LCD Monitor
standing.
• Refer to your TV's or LCD Monitor's
Setup Guide.
2
Remove the screws from the
rear of the TV or LCD Monitor.
3
Attach the Wall-Mount
Attachment
the TV or LCD Monitor) to the
rear of the TV or LCD Monitor
(to make it parallel with the
wall).
(supplied with
VS
1.5 N·m
VS
{15 kgf·cm}
Note
 Be sure to fasten the Wall-Mount Attachment
VS
when attaching them to the TV or LCD
Monitor.
Use only a flat head screwdriver to install the
Wall-Mount Attachment
tool might result in over torqueing the Wall-
Mount Attachment
LCD Monitor.
4
Attach
WM3
WM3
Note
 Do not attach
5
Select wall mounting style as
shown below.
• Refer "Measurement for Wall-Mount
Bracket installation on the wall" on page
21.
WARNING
 When slim mounting is selected, rear terminal
access is limited.
Standard mounting
− 10 (EN) −
VS
. Use of another
VS
and damaging the TV or
.
WM3
WM3
on the labels.
Slim mounting
26 mm 13 mm