Publicité
Les langues disponibles
Les langues disponibles
Accessories
Carrier Fire & Security can provide a handheld walk tester
DI601-WT to aid installations.
Specifications
Detection range
Programmable: 10 m, 20 m or 30 m
10 to 70° detection angle, 30 x 24 m
Coverage
coverage max.
−45° to +45° pan, tilt +45°
Adjustment
Fresnel lens
28 zones for each detection element, which
can be masked with the curtain sliders
Customized optics
Double silicon shielded quad element
eliminates 50,000 lux of white light
LEDs
Top PCB
Red: Programming LED
Sensor PCB
Blue: Detector alarm
Red(small): Anti-mask alarm
Infrared: Walk tester communication
Outputs
Silent, solid state, magnetically immune
Volt free relay, signal contact 24 VAC/DC at
NO
50 mA with an integral 25 Ω series resistor
Alarm time 5 seconds
NC
Volt free relay, signal contact 24 VAC/DC at
50 mA with an integral 25 Ω series resistor
Alarm time 5 seconds
Fault/Mask
Volt free relay, signal contact 24 VAC/DC at
50 mA with an integral 25 Ω series resistor
Power input
10 to 15 VDC
Current
16 mA (12 V nominal)
Standby 27 mA MAX
Pulse count
1 or 2
Temperature
Analogue (thermistor) and digital sensitivity
compensation
adjustment
Digital microprocessor with nonvolatile
Control
memory
Walk test
Output test mode with LED indication.
Option to disable LEDs
−30 to +65°C
Operating temperature
High impact ABS plastic with HDPE cover,
Housing
UV stabilized
Dimensions, W x H x D
125 x 175 x 130 mm
Weight
365 g net, 551 g gross
Variable up to 6 m
Mounting height
Optimum height 3 m for full range
Regulatory information
Manufacturer
PLACED ON THE MARKET BY:
Carrier Fire & Security Americas Corporation Inc.
13995 Pasteur Blvd
Palm Beach Gardens, FL 33418, USA
AUTHORIZED EU REPRESENTATIVE:
Carrier Fire & Security B.V.
Kelvinstraat 7, 6003 DH Weert, Netherlands
P/N 146656999-1 (ML) • REV G • ISS 14DEC20
Product warnings
THESE PRODUCTS ARE INTENDED FOR SALE
and disclaimers
TO AND INSTALLATION BY QUALIFIED
PROFESSIONALS. CARRIER FIRE &
SECURITY CANNOT PROVIDE ANY
ASSURANCE THAT ANY PERSON OR ENTITY
BUYING ITS PRODUCTS, INCLUDING ANY
"AUTHORIZED DEALER" OR "AUTHORIZED
RESELLER", IS PROPERLY TRAINED OR
EXPERIENCED TO CORRECTLY INSTALL FIRE
AND SECURITY RELATED PRODUCTS.
For more information on warranty disclaimers and
product safety information, please check
https://firesecurityproducts.com/policy/product-
warning/
Certification
EN 50130
EN 50130-5
EN 50131
EN 50131-2-2, Grade 3, Class IV
Certified by Telefication B.V.
Note:
EN 50131-2-2 compliant only when
mounted at 1.5 and 3 m
Environmental
IP55
class
This product meets the environmental
requirements of EN 50130-5.
European Union
Carrier Fire & Security hereby declares that this
directives
device is in compliance with the applicable
requirements and provisions of the Directive
2014/30/EU and/or 2014/35/EU. For more
information see www.firesecurityproducts.com or
www.aritech.com.
REACH
Product may contain substances that are also
Candidate List substances in a concentration
above 0.1% w/w, per the most recently published
Candidate List found at ECHA Web site.
Safe use information can be found at
https://firesecurityproducts.com/en/content/intrusi
on-intro
2012/19/EU (WEEE directive): Products marked
with this symbol cannot be disposed of as
unsorted municipal waste in the European Union.
For proper recycling, return this product to your
local supplier upon the purchase of equivalent
new equipment, or dispose of it at designated
collection points. For more information see:
recyclethis.info
Contact information
www.firesecurityproducts.com or www.aritech.com.
For customer support, see www.firesecurityproducts.com.
DE: Montageanleitung
Verpackung
Diese Verpackung enthält folgendes:
•
1 x DI601AM
•
1 x Bohrschablone für Befestigungsbohrungen
•
3 x Wanddübel (31,75 mm)
•
3 x Schrauben (31,75 mm)
•
1 x Objektivabdeckung
•
2 x zusätzliche Schlitzverschlüsse
•
1 x Sabotagehalterung
or scan the QR code.
7 / 46
Publicité
