The appliance doesn't
work.
The food is too warm.
The appliance is too
cold.
Unusual sounds.
There is water on the
floor.
The side panel is hot.
DOOR CONVERSION
If you need to hinge your door on the opposite side it is recommended that you call your local
authorised service agent to make this conversion or ask a technician. Before you reverse the
door, you should ensure the appliance is unplugged and empty. It is recommended to use a
crosshead screwdriver and a spanner (both not supplied).
1.
Remove the top cover plate and unscrew the hinges. Remove the upper door and place it
on a soft surface to prevent scratching.
50
DO928BFK
· The temperature control is
set to '0'.
· The plug is not fully in the
wall outlet.
· The fuse is blown.
· The wall socket is faulty.
· The temperature is not set
correctly.
· The door has been open a
long time.
· Someone put hot food in the
appliance.
· The unit is close to a heat
source for a short while.
The temperature is set too low.
· The appliance is not level.
· The unit it touching a wall or
another object.
The condensation duct is
blocked.
The condensation duct is on this
side.
· Set the temperature control
to a number above '0' to
start the appliance.
· Put the plug in the mains.
· Check the fuses.
· Contact an electrician.
· Set the temperature again.
· Do not open the door longer
than needed.
· Set the temperature lower.
· See the chapter on first use.
Set the temperature higher.
· Readjust the adjusting feet
and level the unit.
· Gently move the appliance.
· Contact your repair service.
See the chapter on cleaning.
This is normal.