Domo DO920DV Mode D'emploi page 39

1. Remove the 2 screws on the back of the top cover.
.
2. Lift the top cover away from the fridge.
3. Remove the three screws and then remove the top hinge that holds the door in place. Lift
the door and place it on a padded surface to prevent it from being scratched.
4. Remove the bottom screw, hinge bracket and adjustable foot from the bottom of the
appliance.
5.
Remove the adjustable foot from another side of the bottom and transfer it to the
corresponding position on the opposite side of the bottom.
6. Attach the screws, hinge bracket and adjustable foot to the opposite side of the bottom.
Loosely secure.
7. Carefully set the door back into place. Ensure the door is aligned horizontally and
vertically so that the seals are closed on all sides before finally tightening the top hinge.
Insert the hinge back and screw it to the top of the appliance.
www.domo-elektro.be
39
DO920DV