STEINEL DALI 2 Serie Mode D'emploi page 11

5. Function and setting
The sensor is put into operation in accordance
with the applicable DALI 2 standard. All func-
tions and commands are available from DALI
standard IEC 62386 Part 101, Part 103, Part
303 and Part 304. The motion detection values
and light levels measured by the sensor can be
requested from the DALI Application Controller.
Automatic or time-based cyclical transmission
can also be selected.
You will find detailed information in the interface
description on the Internet at: DALI-2.steinel.de
LED function: Blue LED
Initialisation: LED flashes once every 2 seconds.
Normal mode: LED stays OFF.
DALI identification: LED flashes once a second.
6. Maintenance / care
The product requires no maintenance.
The detector lens may be cleaned with a damp
cloth if it gets dirty (do not use cleaning agents).
7. Disposal
Electrical and electronic equipment, acces-
sories and packaging must be recycled in an
environmentally compatible manner.
Do not dispose of electrical and
electronic equipment as domestic
waste.
EU countries only:
Under the current European Directive on Waste
Electrical and Electronic Equipment and its
implementation in national law, electrical and
electronic equipment no longer suitable for use
must be collected separately and recycled in
an environmentally compatible manner.
8. Manufacturer's Warranty
Manufacturer's warranty of STEINEL GmbH,
Diesel strasse 80-84, DE-33442 Herze-
brock-Clarholz, Germany
All STEINEL products meet the highest quality
standards. For this reason, we, the manufac-
turer, are pleased to provide you, the customer,
with a warranty under the following terms and
conditions:
The warranty covers the absence of deficien-
cies which are proven to be the result of a
material defect or fault in manufacturing and
which are reported to us immediately after
detection and within the warranty period. The
warranty shall cover all STEINEL Professional
products sold and used in Germany.
Our warranty cover for consumers
The provisions below apply to consumers.
A consumer is any natural person who, on
entering into the purchase transaction, neither
acts in exercising their commercial nor their
self-employed activity.
You can opt for warranty cover in the form of
repair or replacement which will be provided
free of charge (if applicable, in the form of a
successor model of the same or higher quality)
or in the form of a credit note.
In the case of sensors, floodlights, outdoor and
indoor lights, the warranty period for the STEI-
NEL Professional product you have purchased
is 5 years in each case from the date on which
the product was purchased.
We shall bear the shipping costs but not the
transport risks involved in return shipment.
Our warranty cover for entrepreneurs
The provisions below apply to entrepreneurs.
Entrepreneur is a natural or legal person or
partnership with legal personality who or
which, on entering into the purchase transacti-
on, acts in exercising their or its commercial or
self-employed activity.
We have the option of providing warranty cover
by rectifying deficiencies free of charge, repla-
cing a product free of charge (if applicable, in
the form of a successor model of the same or
higher quality) or by issuing a credit note.
In the case of sensors, floodlights, outdoor and
indoor lights, the warranty period for the
- 11 -
GB