thuba PTB 24 ATEX 1002 X Manuel page 31

Manual
PTB 24 ATEX 1002 X
6.3 Requirements for enclosures
The state of the seals shall be checked. When
replacing cable glands or blanking plugs, it is
necessary to pay attention to the correct sealing
of the O-rings
6.4 Defective trace heating systemss
Defective explosionproof trace heating systems
can be reported to the manufacturer.
thuba Ltd.
Stockbrunnenrain 9
CH-4123 Allschwil
customer.center@thuba.com
7. Disposal
When disposing the explosionproof trace heating
systems, the respective national regulations gov-
erning waste disposal shall be observed.
Edition May 2024
Copyright
/
PTB 24 ATEX 1003 X
23
thuba Ltd., CH-4002 Basel
Switzerland