Amica 2013CCTs Serie Notice D'utilisation page 96

OPERATION
Oven functions and operation.
Oven with conventional heating
(including top and bottom heaters)
The oven can be warmed up using the bottom
and top heaters, as well as the grill. Operation
of the oven is controlled by the oven function
knob – to set a required function you should
turn the knob to the selected position, as well
as the temperature regulator knob – to set a
required function you should turn the knob to
the selected position.
O
C
The oven can be switched off by setting both
of these knobs to the position ""/"0".
Caution!
When selecting any heating function
(switching a heater on etc.) the oven
will only be switched on after the
temperature has ben set by the tem-
perature regulator knob.
Possible settings of the oven function
knob
0 0
Switching on the oven is indicated by two
signal lights, yellow and red, turning on. The
yellow light turned on means the oven is
working. If the red light goes out, it means
the oven has reached the set temperature.
If a recipe recommends placing dishes in a
warmed-up oven, this should be not done
before the red light goes out for the first time.
When baking, the red light will temporarily
come on and go out (to maintain the tem-
perature inside the oven). The yellow signal
light may also turn on at the knob position of
"oven chamber lighting".
96
Separate oven lighting
By setting the knob to this position
the lighting inside the oven is swit-
ched on, e.g. use when washing the
oven chamber.
Bottom and top heaters on
Setting the knob to this position
allows the oven to be heated con-
ventionally.
Bottom heater on
When the knob is set to this position
the oven is heated using only the bot-
tom heater. Use for e.g. final baking
from the bottom.
Top heater on
Setting the knob to this postion al-
lows the oven to be heated only with
the top heater switched on, e.g. use
for final baking from above.
Grill heater on
Setting the knob to this position al-
lows dishes to be grilled on the grate.