Publicité
Les langues disponibles
Les langues disponibles
Glows
Remote control the dishwasher
The dishwasher's network symbol
smartphone/tablet. You can use the ATAG Connect Life app to monitor the dishwasher and change
settings.
Remote start the dishwasher
To remote start the dishwasher, press
display. Close the door. The status light will flash blue/green to indicate that remote start is activated.
In the ATAG Connect Life app, select and start a program.
If the door is not closed within 2 minutes, the machine switches off.
NOTE!
The dishwasher can always be used without the app. When the dishwasher's control panel is
pressed, commands from the ATAG Connect Life app are blocked for 10 seconds.
Pair more devices
Pair more devices/users with the dishwasher. (This can also be done from the dishwasher's Settings
menu.)
Open the ATAG Connect Life app and log in to your account or register a new account.
Go to Appliances. Click on Add appliances or the + button. Select Home appliances.
Scan the dishwasher's QR code (see the serial number plate). Follow the further instructions in
the app.
Open the dishwasher door and press
On the dishwasher's control panel: Press and hold
WiFi connection Off / WiFi connection On
After connecting the dishwasher to your local network, you can select WiFi connection Off to deactivate
the connection. Select WiFi connection On to reconnect to the same network. (This can also be done
from the dishwasher's Settings menu.)
On the dishwasher's control panel: Press and hold
Off. Briefly press
Remove all devices
Remove all connected devices/users. (This can also be done from the dishwasher's Settings menu.)
On the dishwasher's control panel: Press and hold
3 seconds to select Remove all devices.
The dishwasher is connected to your wireless network and the cloud.
is shown on the display when the dishwasher is paired with a
. Remote start activated will appear on the dishwasher's
.
to select WiFi connection On again.
WiFi connection
for 4 seconds to initiate Add device.
for 8 seconds to select WiFi connection
for 4 seconds, then press and hold
for
25
Publicité
