Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Tools and Parts
Style 1 - Top Mount Sinks
Gather the required tools and parts before starting installation.
Read and follow the instructions provided with any tools listed
here.
Tools needed
Drill
³⁄₈" drill bit
Jigsaw
File
Tape measure
Pencil
Phillips head screwdriver
Flat-blade screwdriver
8" adjustable wrench
Silicone sealant*
*Silicone caulk/sealant must meet the qualifications of ASTM
C920, FDA regulation no. 21, CFR 177.2600, NSF-51. Dow
Corning
®
786 is recommended.
Parts supplied
Sink
Sink template
Sink mounting hardware (clamps)
Installation Instructions/Use and Care Guide
Parts needed
Faucet with check valve and accompanying plumbing
supplies as needed
8 #10 screws (type depending on countertop material and
thickness). ¹⁄₂" recommended.
2
INSTALLATION REQUIREMENTS
Tools and Parts
Style 2 - Undermount Sinks
Gather the required tools and parts before starting installation.
Read and follow the instructions provided with any tools listed
here.
Tools needed
Drill
Clamps
Tape measure
Solvent, such as denatured alcohol
Router (wooden template recommended for guide bushing
use)
³⁄₈" router guide bushing
1³⁄₁₆" router guide bushing
¹⁄₄" straight cutter bit
¹⁄₂" straight cutter bit
#2 Phillips screwdriver
Silicone sealant*
*Silicone caulk/sealant must meet the qualifications of ASTM
C920, FDA regulation no. 21, CFR 177.2600, NSF-51. Dow
Corning
®
786 is recommended.
Parts supplied
Sink
Sink template
Sink mounting hardware (clamps)
Installation Instructions/Use and Care Guide
Parts and materials needed
Faucet with check valve and accompanying plumbing
supplies as needed
¹⁄₂" plywood sheet (recommended for router template)
8 #10 screws (type depending on countertop material and
thickness). ¹⁄₂" recommended.
Publicité
Table des Matières
