Atag KD86102CN Manuel D'utilisation page 114

OPERATING THE APPLIANCE
Switching on the freezer and setting the temperature
The temperature can be set to between -24 °C and -16 °C. The recommended
temperature is -18 °C (factory setting).
After you have switched on the appliance it will take several hours for the temperature to
decrease to the set temperature. Do not put food into the appliance until the temperature
has decreased to the set temperature.
The adjusted temperature flashes on the control panel when you touch the adjustment
keys. The selected temperature setting is saved three seconds after the last key is
touched.
Switching off the freezer
Intensive freezing (FastFreeze)
This appliance has an intensive freezing function. This function decreases the temperature in
the freezer compartment as quickly as possible. Activate this function 24 hours before you put a
large quantity of fresh food in the appliance.
When the intensive freezing function is selected, the appliance works at maximum
capacity. It may then make more noise for a while.
EN 18
1. Touch the On/Off key.
▷
The freezer turns on.
2. Use the adjustment keys to adjust the temperature.
1. Touch the On/Off key for three seconds.
▷
The freezer turns off.