DESCRIPTION OF THE APPLIANCE
Drawers (depending on the model)
A number of drawers are mounted on fully extending telescopic rails
1
and are fitted with a soft-close system.
2
To remove a drawer from the rails, pull the drawer fully out. Lift the back
of the drawer (1). Pull the drawer to you (2) and then lift the drawer from
3
the rails.
5
3
To fit the drawer onto the rails, pull the two rails fully out. Place the
6
drawer on the rails (3). In the front, press the drawer and the rails
click
towards each other on the right and the left side until you hear a "click"
4
click
4
(4). Press the back of the drawer downwards if necessary (5). Finally,
slide the drawer on the rails fully in (6).
Ice cube tray (IceTray)
To make ice cubes, fill the tray with water and lay it horizontally in the
freezer.
EN 16