Domo DO936DVK Mode D'emploi page 35

Les langues disponibles

PARTS

Handle

Drainage opening

Storage basket

Temperature control knob

BEFORE THE FIRST USE

INSTALLATION

· Remove the exterior and interior packing, wipe the outside thoroughly with a soft dry cloth

and the inside with a wet, lukewarm cloth. Avoid placing the cabinet in a narrow recess

or near any leave source, direct sunlight, or moisture. Let air circulate freely around the

cabinet.

· Select a place with a strong, level floor.

· Avoid direct sunlight and heat. Direct sunlight may affect the acrylic coating. Heat sources

nearby will cause higher electricity consumption.

· Avoid very moist places. Too much moisture in the air will cause frost to from very quickly

on the evaporator, and your freezer.

· Before connecting your freezer to the power supply, check that the voltage stated on the

rating label of your appliance corresponds to the voltage in your home. A different voltage

could damage the appliance.

· The appliance must be grounded. The manufacturer is not responsible for damages that

may occur as a result of usage without grounding.

· For uneven surfaces, front feet can be aligned.

· After installation, leave the freezer for 8 hours before turning it on. This way the refrigerant

can settle.

· Allow the appliance to run empty for 24 hours so the compartment can cool to the

appropriate temperature.

· The appliance may only be used indoors.

www.domo-elektro.be

DO936DVK