Before Using Your Appliance For The First Time; Preliminary Cleaning; Initial Burn-In; Electronic Clock - Siemens HB 28 K Série Mode D'emploi

Before Using Your Appliance for the First Time

Preliminary cleaning:

1. Clean the appliance exterior with a soft
moistened cloth.
2. Clean the oven and the accessories with
a hot detergent solution.
Time of day
Before you use your appliance for the
first time, it is necessary to set the
current time on the electronic timer.
After connecting to the mains, or after a
power failure, the display
Setting the time:
+
Press the button and set the current
time with the rotary knob (e.g.
Note: The time cannot be set if an
automatic function is active (see Electronic
clock for cancelling automatic function).

Special functions

Masking out the display:
1. Press the button for 4 seconds.
+
The display then goes blank and the
time continues running in the
background.
2. To switch on the display, briefly press
the button.
+
Dimming the display:
Between 22.00 and 6.00 the display is
automatically dimmed.
36

Electronic clock

will blink.
{:{{
).
| Å:{{

Initial burn-in

1. Heat the empty oven for approx.
30 minutes.
Select top and bottom heat at a setting
of 240° C.
During the initial burn-in phase, please
open the kitchen windows to dissipate
unpleasant odours.
Note:
The automatic timer is best used with
dishes which require little attention.
The minute timer and OFF time can be
pre-programmed up to a max. 24 hours.
The settings can be displayed at any
time by pressing the relevant button.
To cancel the preset time:
Press the button and reset the time
g
to .
{:{{