Tanaka TLE 550 Manuel D'utilisation page 50

SPECIFICATIONS
En
Model .................................................. TLE-550
Engine size (cm
Cylinder .............................................. Aluminum alloy with steel sleeve
Ignition system.................................... Transistorized electorized electronic
Spark plug .......................................... NGK BM7A or BMR7A or equivalent
Carburetion ......................................... Diaphragm
Clutch system ..................................... 3 shoe-centrifugal
Drive system ....................................... Straight shaft drive
Reduction ratio ................................... 2 : 1
Fuel tank capacity( )......................... 2.35 (79.39 fl.oz.)
Dry weight (kg) ................................... 23.0 (50.6 lbs.)
Front wheel (mm) ............................... 1-20.32 x 6.35 (8 x 2.5 in.)
Rear wheel (mm) ................................ 2-20.32 x 4.44 (8 x 1.75 in.)
Blade size (mm).................................. 230 (9 in.) x 8 t
Cutting depth ...................................... 9 settings up to 80 mm (3.1 in.) deep:
Arbor diameter (mm) .......................... 12.70 (0.5 in.)
Air cleaner .......................................... Dual oiled foam type
Blade guard ........................................ Semi-enclosed, multi-positioned safety
Sound pressure lever (dB (A)) ............ Lpmeasured
Sound power lever (dB (A)) ................ Lwguaranteed
Vibration level (in/S
NOTE: Equivalent noise level/vibration level are calculated as the time-weighted energy total for
noise/vibration levels under various working conditions with the following time distribution:
idle,
All data subject to change without notice.
44
3
) ................................ 50 (31 cu. in.)
2 ) .......................... 8.7
full speed.
ignition
Manually controlled with lever at
operator's station.
guard with debris deflector.
93.2
104
TLE-600
←
←
←
←
←
←
←
←
←
←
←
←
254 (10 in.) x 2 t
←
←
←
←
←
←
←