Assa Abloy eCLIQ Connect N110 Instructions D'utilisation page 30

Design-2 and -3 – Signalling
The key signals as soon as it has been inserted into the cylinder or activated
("Design-2 – Activation", page 26 or "Design-3 – Activation", page 28).
Comment
Normal mode
Battery is almost empty.
Replacing the battery
Locking authorisation OK
No locking authorisation
No locking authorisation,
because the key is currently
outside of the time zone
Bluetooth interface is activated
Cylinder authorisation update
(only relevant for
CLIQ GO systems)
®
EN
30
Signalling (red / green)
Acoustic
–
3 x long
1 x short
3 x short
3 x short
1 x short
1 x short,
1 x long
Design-2 and -3 – Signalling
Visual
–
3 x long green
1 x short green
3 x short red
3 x short
red – green – red
1 x short green
1 x short green,
1 x long green