Servicing Your Engine - Honda GP160 Manuel De L'utilisateur

SERVICING YOUR ENGINE

THE IMPORTANCE OF MAINTENANCE
Good maintenance is essential for safe, economical and
trouble-free operation. It will also help reduce pollution.
Improper maintenance, or failure to correct a problem
before operation, can cause a malfunction in which
you can be seriously hurt or killed.
Always follow the inspection and maintenance
recommendations and schedules in this owner's
manual.
To help you properly care for your engine, the following pages
include a maintenance schedule, routine inspection procedures, and
simple maintenance procedures using basic hand tools. Other
service tasks that are more difficult, or require special tools, are best
handled by professionals and are normally performed by a Honda
technician or other qualified mechanic.
The maintenance schedule applies to normal operating conditions.
If you operate your engine under severe conditions, such as
sustained high-load or high-temperature operation, or use in
unusually wet or dusty conditions, consult your servicing dealer for
recommendations applicable to your individual needs and use.
Use only Honda Genuine parts or their equivalent. The use of
replacement parts which are not of equivalent quality may damage
the engine.
MAINTENANCE SAFETY
Some of the most important safety precautions follow. However,
we cannot warn you of every conceivable hazard that can arise in
performing maintenance. Only you can decide whether or not you
should perform a given task.
Failure to properly follow maintenance instructions
and precautions can cause you to be seriously hurt or
killed.
Always follow the procedures and precautions in this
owner's manual.
SAFETY PRECAUTIONS
• Make sure the engine is off before you begin any maintenance or
repairs. To prevent accidental startup, disconnect the spark plug
cap. This will eliminate several potential hazards:
– Carbon monoxide poisoning from engine exhaust.
Operate outside, away from open windows or doors.
– Burns from hot parts.
Let the engine and exhaust system cool before touching.
– Injury from moving parts.
Do not run the engine unless instructed to do so.
• Read the instructions before you begin, and make sure you have
the tools and skills required.
• To reduce the possibility of fire or explosion, be careful when
working around gasoline. Use only a non-flammable solvent, not
gasoline, to clean parts. Keep cigarettes, sparks and flames away
from all fuel related parts.
Remember that an authorized Honda servicing dealer knows your
engine best and is fully equipped to maintain and repair it.
To ensure the best quality and reliability, use only new Honda
Genuine parts or their equivalents for repair and replacement.
6
MAINTENANCE SCHEDULE
REGULAR SERVICE PERIOD (1)
Perform at every
indicated month or
operating hour interval,
whichever comes first.
ITEM
Engine oil Check level
Change
Air cleaner Check
Clean
Spark plug Check-adjust
Replace
Valve clearance Check-adjust
Combustion Clean
chamber
Fuel tank & filter Clean
Fuel tube Check
(1) For commercial use, log hours of operation to determine
proper maintenance intervals.
(2) Service more frequently when used in dusty areas.
(3) These items should be serviced by your servicing dealer,
unless you have the proper tools and are mechanically
proficient. Refer to the Honda shop manual for service
procedures.
Failure to follow this maintenance schedule could result in
non-warrantable failures.
ENGLISH
Each First Every 3 Every 6 Every
Use Month Months Months Year
or or or
20 Hrs 50 Hrs 100 Hrs 300 Hrs
o
o o
o
o (2)
o
o (3)
After every 500 Hrs. (3)
o (3)
Every 2 years
(Replace if necessary) (3)
Refer
to
or Page
8
8
9–10
9–10
11
o
Shop
manual
Shop
manual
Shop
manual
Shop
manual