Publicité
Les langues disponibles
Les langues disponibles
Working procedures
Working principle
The oscillating drive causes the application tool to
move back and forth at speeds of up to 21000
times a minute. This allows for precision work even
in confined spaces.
Sawing/cutting
■
Use only undamaged saw blades that are in
perfect working order. Bent, blunt or otherwise
damaged saw blades may break.
■
When sawing lightweight construction materials,
follow the statutory regulations and all recom-
mendations from the material manufacturers.
■
Only soft materials such as wood, plasterboard
or similar should be processed using the plunge
saw process.
Sanding
■
To prolong the service life of the sanding sheets,
ensure that you apply even pressure.
■
6
│
GB │ IE
Assembly
Dust/chip extraction
Materials containing asbestos may not be
processed. Asbestos is a known carcinogen.
WARNING! RISK OF FIRE!
■
When working with electrical appliances that
can be connected to a vacuum cleaner via a
vacuum cleaner adapter, there is a risk of fire!
In unfavourable conditions, e.g. when sparks
are flying while sanding metal or metal resi-
dues in wood, wood dust in the bag of the
vacuum cleaner can spontaneously ignite.
This is a particular risk if the wood dust is
mixed with paint residues or other chemicals
and the workpiece has become hot after
being worked for a long time. Therefore,
avoid overheating of the material being
sanded as well as the appliance. Always
empty the vacuum cleaner's dust bag before
taking work breaks.
■
Use only approved vacuum cleaners, such as:
B. a workshop vacuum cleaner.
Wear a dust mask!
■
Always use dust extraction.
■
Ensure that your workplace is adequately
ventilated.
■
Observe the regulations applicable in your
country regarding the materials to be worked.
Connecting a dust extraction unit
♦
Place the dust extraction unit
appliance and fix it into place on the appliance
with the screw.
♦
Fit the angle adapter
unit
.
The angle adapter
180°.
under the
onto the dust extraction
can be turned by up to
PMFW 310 F4
Publicité
