Sony STR-DN1060 Guide De Référence page 9

MHL section
Supported MHL version
Incorporates MHL 2 (front)*, MHL 3
(rear)
Maximum current
900 mA
* STR-DN1060 only.
iPhone/iPad/iPod section
DC 5V 1.0 A MAX
USB works with iPhone 6 Plus, iPhone 6,
iPhone 5s, iPhone 5c, iPhone 5, iPhone 4s,
iPhone 4, iPhone 3GS, iPhone 3G, iPod
touch (2nd through 5th generation), iPod
classic, and iPod nano (3rd through 7th
generation).
BLUETOOTH technology works with iPhone
6 Plus, iPhone 6, iPhone 5s, iPhone 5c,
iPhone 5, iPhone 4s, iPhone 4, iPhone 3GS,
and iPod touch (4th and 5th generation).
AirPlay works with iPhone, iPad, and iPod
touch with iOS 4.3.3 or later, Mac with OS X
Mountain Lion or later, and PC with iTunes
10.2.2 or later.
You can use "SongPal" app with this
receiver via BLUETOOTH or network
connection.
You can only charge the iPhone/iPod when
they are connected to the USB port while
the receiver is turned on.
USB section
(USB) port:
Type A (For connecting USB memory)
NETWORK section
Ethernet LAN
100BASE-TX
Wireless LAN
Compatible standards:
IEEE 802.11 a/b/g/n
Security:
WPA/WPA2-PSK, WEP
Radio frequency:
2.4 GHz, 5 GHz
BLUETOOTH section
Communication system
BLUETOOTH Specification version 3.0
Output
BLUETOOTH Specification Power
Class 1
Maximum communication range
Line of sight approx. 30 m
Frequency band
2.4 GHz band (2.4000 GHz –
2.4835 GHz)
Modulation method
FHSS (Freq Hopping Spread
Spectrum)
Compatible BLUETOOTH profiles
A2DP 1.2 (Advanced Audio
Distribution Profile)
AVRCP 1.5 (Audio Video Remote
Control Profile)
SPP (Serial Port Profile)
3)
Supported Codecs
4)
SBC , AAC, LDAC
Transmission range (A2DP)
20 Hz – 20,000 Hz (Sampling
frequency 44.1 kHz, 48 kHz, 88.2 kHz,
96 kHz)
1)
The actual range will vary depending on
factors such as obstacles between
devices, magnetic fields around a
microwave oven, static electricity,
cordless phone, reception sensitivity,
antenna's performance, operating
system, software application, etc.
2)
BLUETOOTH standard profiles indicate
the purpose of BLUETOOTH
communication between devices.
3)
Codec: Audio signal compression and
conversion format
4)
Subband Codec
General
Power requirements
230 V AC, 50/60 Hz
Power consumption
240 W
1)
2)
9
GB