ON THE SIDE...
To maximize your cooking
space and to help you
multitask, your grill was
designed with a side burner.
Igniting the side burner is
easy. It uses the same igniter
button as the main burners,
but it ignites independently.
Summary lighting instructions are inside
the cabinet door.
20
WWW.WEBER.COM
®
SIDE BURNER IGNITION & USAGE
SIDE BURNER IGNITION
Lighting with the Igniter Button
Unlike the main burners, the side burner does not ignite
from burner 1. Below are the steps that apply to igniting
the side burner using the igniter button.
A) Open the side burner lid (1).
m DANGER
Failure to open the lid before igniting
the side burner, or not waiting five
minutes to allow the gas to clear if the
side burner does not light, may result in
an explosive flare-up which can cause
serious bodily injury or death.
B) Check that the side burner valve is turned off by
pushing side burner control knob in and turning it
clockwise until it stops (2). Turn all burners not being
used to the off ( ) position by pushing all control
knobs in and turning them clockwise until they stop.
C) If it is not on already, turn the LP cylinder on by SLOWLY
turning the cylinder valve counterclockwise (3).
D) Push in and turn side burner control knob
counterclockwise to start/high ( ) position (4).
E) Push and hold in the igniter button (5). You will hear
the igniter clicking. You should see a flame.
m CAUTION: Side burner flame may be
difficult to see on a bright sunny day.
m WARNING: If the side burner does not
light in five seconds:
a) Turn off the side burner and main
burner control knobs and gas
supply at source.
b) Wait five minutes to let the gas clear
before you try again or try lighting
with a match (refer to "Lighting with
a Match").
TO EXTINGUISH SIDE BURNER
Push side burner control knob in and turn it clockwise to
the off ( ) position. Be sure the side burner is off and cool
before closing the side burner lid.
1
3
4
2
5