Publicité
Les langues disponibles
Les langues disponibles
A
Shed Care & Maintenance
• At regular intervals, inspect your shed to make sure that assembly integrity has been maintained.
• Periodically check that the location you have chosen to set your shed is still level.
• Keep roof clean of snow and leaves.
• To maintain the look of your product, we recommend cleaning it at regular intervals with mild
soap and water. DO NOT use bleach, ammonia, or other caustic cleaners, and DO NOT use
stiff bristle brushes. Failure to perform annual cleaning could result in permanent staining of the
plastic. This is not a manufacturing defect and is not covered under warranty.
Assembly Day Tips
• DO NOT attempt to assemble on a day with strong winds.
• Set aside an appropriate amount of time to completely assemble shed. An incomplete shed
assembly may pose a safety hazard.
• Make sure you have assistance nearby to lift and secure parts in place.
• Once roof is assembled, a flashlight may be of use when assembling smaller components
inside shed.
• DO NOT use a torque wrench or hand drill bit to tighten Easy Bolts. Use provided Easy Bolt
Driver ONLY.
• Suncast provides extra hardware for small fasteners for customer convenience. In some cases,
there will be extra small fasteners once the assembly is complete.
Note: This product contains parts that are used in different orientations to construct the shed. Please take note of
the orientation of the parts shown throughout this instruction manual. Failure to follow instructions could result in
damage to parts. Suncast is not responsible for replacing parts lost or damaged due to incorrect assembly.
Note: Texture or design of shed panels may differ in manual from the actual unit purchased.
4
Publicité
