Suncast BMS6284 Instructions D'assemblage page 12

Assembly Walls
( continued)
Lock side panel (C) by sliding panel toward rear of floor
panel (front corner tab will slide over floor and into
position).
Align tabs on bottom right side panel (C) with slots on
floor (A). Lower panel into slots.
Tilt right panel (C) outward.
7
Note: Use a rubber mallet to 'push' right side panel
(C) into locked position.
At an angle, align tabs on side of right back panel (D)
with slots on right side panel (C). Slide back right back
panel in and down into right side panel to secure.
12