Publicité
Les langues disponibles
Les langues disponibles
assembly
building-in
B
B
1. Remove the 4 screws (A) and the brackets (B).
A
2. Slide the extractor hood into the kitchen cupboard / the
3
Tip: During installation leave sufficient cable free, so that the
ceiling unit can be dismantled for servicing.
GB 14
C
D
self-assembled mantel. Tighten the screws (C), so that
the extractor hood is clamped by the braces (D).
Secure the brackets (H) again with the screws (E).
technical data
type number:
power supply:
connected load:
dimensions (h x w x d): see "fitting dimensions"
This appliance complies with the CE directives.
disposal of packaging and appliance
The packaging of this appliance is recyclable and could be
made of:
■
■
■
These materials are to be disposed of responsibly and in
accordance with government regulations.
To draw attention to the obligation to process electrical
household appliances separately, the product carries the
symbol of a dustbin with a cross through it:
This means that at the end of its working life the product
may not be disposed of as household waste, but must be
taken to a segregated waste collection centre run by the
local authorities or to a dealer providing this service.
Processing household appliances such as this hob
separately prevents negative impacts on the environment
and public health, which might otherwise result from
inappropriate processing.
It also enables the recovery of materials used in the
production of the appliance, thus realising considerable
savings in terms of both raw materials and energy.
see data plate in the hood
230 V - 50 Hz
see data plate
cardboard;
polythene (PE) film;
CFC-free polystyrene (PS – hard foam).
GB 15
Publicité
